Shaded pole motor 26/18 series(multi-function design)

 

　　Foot mounting: Track dimension 26mm or 18 mm possible

　　Type of protection: IP42 or IP44

　　Electrical connection: Jacketed cable 3x0.5 m㎡ with brass lead tips

　　Product conforming to standard: CE

　　Approvals: VDE( except 3W),CCC

　　

　　Valid for all design:

　　—Material: Housing made of die-cast aluminium

　　Stator pack: coated in black

　　—Direction of air flow: "S"or "B"(depending on axial impeller used)

　　—Direction of rotation: clockwise(or counterclockwise), seen on shaft end

　　—Insulation class: B

　　—Mounting position: Any, preferrably horizontal

　　—Condensate discharges: None

　　—Mode of operation: Continuous operation (S1)

　　—Bearings: self-adjusting calotte sleeve bearing(mean service life of 30,000 hours in horizontal installations position)

　　—Motor protection: impedance switched ( combination D-H)

　　—Mounting: guard grille and wall ring are mounted onto the protruding thread ends of theA side.The Q-motor can also be screwed on via the mounting flanges (integrated in the bearing shields).

　　—Axial impeller mounting: Mounted to the motor shaft using a plastic adapter with pulling peg and an M4 screw(combination A-D) OR M5 (combination E-H) screw.

　　Power specifications: At 60Hz, the blade angle of the axial impellers must be reduced 6° each.