Shaded pole motor 18 series
Foot mounting: Track dimension 18 mm
Type of protection: IP42 or IP44
Electrical connection: Jacketed cable 3x0.5 m㎡ with brass lead tips
Product conforming to standard: CE
Approvals: VDE( except 3W),CCC
Valid for all design:
—Material: Housing made of die-cast aluminium
Stator pack: coated in black
—Direction of air flow: "S"or "B"(depending on axial impeller used)
—Direction of rotation: clockwise(or coounter-clockwise), seen on shaft end
—Insulation class: B
—Mounting position: Any, preferrably horizontal
—Condensate discharges: None
—Mode of operation: Continuous operation (S1)
—Bearings: self-adjusting calotte sleeve bearing(mean service life of 20,000 hours in horizontal installations position)
—Motor protection: impedance switched ( combination D-H)
—Mounting: guard grille and wall ring are mounted onto the protruding thread ends of theA side.The Q-motor can also be screwed on via the mounting flanges (integrated in the bearing shields).
—Axial impeller mounting: Mounted to the motor shaft using a plastic adapter with pulling peg and an M4 screw(combination A-D) OR M5 (combination E-H) screw.
Power specifications: At 60Hz, the blade angle of the axial impellers must be reduced 6° each.
1. performance parameters
2. shape and the size of installation